Cleaning a Vehicle


 

Prepare Area:
Attach the 40° nozzle to your Kärcher pressure washer and spray away loose dirt and grit from the vehicle. [Note! Always keep the spray wand at least 10” away from your vehicle’s surface. Damage may occur at distances less than 10”!]

Apply Detergent:
Attach the Detergent Nozzle and apply Kärcher’s environmentally friendly Vehicle Wash & Wax detergent in large, circular movements. Work from the front to the back of the vehicle and from the bottom upward. Allow the solution to soak on the surface for 2-3 minutes for best results. [Note! Do not allow the detergent to dry on the vehicle surface!]

Power Clean:
For best results, attach Kärcher’s Rotating Wash Brush to safely and more effectively remove insects or tough road film from the vehicle surface. Then re-attach the 40° nozzle and rinse the vehicle, working from the front to the back and from the bottom upward. Use Kärcher’s Underbody Spray Wand Kit to clean the wheel walls and undercarriage as well as the tops of SUV’s, vans and motor homes.

Dry:
Dry the vehicle with a chamois or towel.


For optimum results, always test a small inconspicuous area before starting a cleaning project with your pressure washer.

With my Kärcher pressure washer...

   under 2400 PSI.

   2400 PSI or higher



You need to upgrade your Flash Player in order to view the video.