Cleaning Landscape Decorations


Prepare Area:

Using the high-pressure setting on the Vario Spray Wand (1), remove any loose dirt or grass from the surface.

Apply Detergent:

If needed, apply Kärcher’s environmentally friendly All Purpose and Vehicle Cleaner detergent with the Vario Spray Wand’s low-pressure setting (2) and allow the detergent to soak for 2-3 minutes. Note! Do not use detergents on birdbaths, ponds or areas where runoff could affect wildlife.

Power Clean:

Finish cleaning the surfaces with the Vario Spray Wand’s high-pressure setting (1), moving the nozzle closer for stubborn dirt and confined areas. Use the Dirtblaster™ Rotary Spray Wand (3) to more easily remove mildew, moss and lichen from cement, stone, tile or other hard surfaces. Warning! Avoid lingering in one spot to prevent the Dirtblaster’s powerful jet from damaging surfaces.

Tip:

Note! Do not use detergents on birdbaths, ponds or areas where runoff could affect any wildlife.

(1) If your Kärcher pressure washer came equipped with a Quattro-Nozzle Spray Wand, use its high-pressure fanjet setting for similar results.

(2) If your Kärcher pressure washer came equipped with a Quattro-Nozzle Spray Wand, use its low-pressure detergent setting for similar results.

(3) If your Kärcher pressure washer came equipped with a Quattro-Nozzle Spray Wand, use its Dirtblaster™ setting for similar results.

For optimum results, always test a small inconspicuous area before starting a cleaning project with your pressure washer.