Cleaning my Deck


Prepare Area:
Remove all furniture items from the deck. Using the Vario Spray Wand’s high-pressure setting (1), clear away any leaves or loose dirt

Apply Detergent:
Using the low-pressure setting on the Vario Spray Wand (2), apply Kärcher’s environmentally friendly Deck and Patio Cleaner detergent to the surface and allow it to soak for 3-5 minutes. The detergent will break down any oils or surface film for more effective cleaning. Do not allow the detergent to dry.

Power Clean:
For more even results, attach a T-Racer Surface Cleaner and adjust the nozzles to the desired height. Working away from the pressure washer, begin cleaning in a continuous side-to-side sweeping motion. Keep the T-Racer moving constantly to prevent uneven cleaning or surface damage. When you finish cleaning the deck area, remove the T-Racer and reattach the wand. Use a medium or high-pressure setting to clean any rails, corners or other hard to reach areas.

Rinse Deck:
Give the deck a final rinse with the pressure washer set on high-pressure. This will flush away any remaining detergent or dirt. Allow the deck to dry for 24-28 hours before staining or sealing.

 

 
(1) If your Kärcher pressure washer came equipped with a Quattro-Nozzle Spray Wand, use its high-pressure fanjet setting for similar results.

(2) If your Kärcher pressure washer came equipped with a Quattro-Nozzle Spray Wand, use its low-pressure detergent setting for similar results.

For optimum results, always test a small inconspicuous area before starting a cleaning project with your pressure washer.

With my Kärcher ...

   electric pressure washer

   gas pressure washer